🧊 Backflow Winterization: Protect Your Irrigation System Before the First Freeze
- Sprinkler Repair Professionals
- Oct 29
- 3 min read
When temperatures start dropping across Texas, most homeowners think about covering plants or wrapping pipes — but one of the most overlooked steps in protecting your irrigation system is backflow winterization.
Even a single overnight freeze can cause expensive damage to your backflow prev
enter, valves, and connected lines. Here’s what every property owner should know before winter hits.
💧 What Is a Backflow Preventer?
Your backflow preventer is the device that keeps irrigation water from flowing backward into your home’s drinking water supply. It’s usually mounted above ground, close to where your sprinkler system connects to your main water line.
Because it’s exposed to the elements, it’s one of the first parts to freeze when cold weather arrives — and one of the most expensive to replace if it cracks or bursts.
🥶 Why Winterization Matters in Texas
It’s easy to assume our winters are “mild,” but Texas cold snaps are unpredictable. All it takes is a few hours of sub-freezing temperatures to:
Crack brass backflow assemblies
Burst PVC fittings and irrigation pipes
Flood your yard or home when the thaw hits
A damaged backflow can cost $300–$700+ to replace — while proper winterization costs a fraction of that.
⚙️ How to Winterize Your Backflow Preventer
Here’s what we recommend as we head into the winter season:
1. Turn Off the Water Supply
Locate your irrigation shut-off valve (usually inside a valve box or near the water meter). Turn it clockwise until fully closed.
2. Relieve the Pressure
Open the test cocks and shut-off valves on your backflow to let any remaining water drain out. This releases pressure that can split fittings when water freezes and expands.
3. Drain or Blow Out the Lines
If your system has low spots that trap water, use compressed air to blow out the lines — or have a licensed irrigation technician handle it to avoid damaging valves and heads.
4. Insulate and Cover
Wrap the backflow assembly with insulating foam pipe wrap or a heavy towel.
Cover with a backflow insulation bag or a Styrofoam enclosure.
Make sure it’s secured against wind and moisture.
5. Label and Check
Before spring startup, remove insulation and ensure valves are open and functional.
🧰 Pro Tip: Don’t Forget Commercial or HOA Systems
For businesses, HOAs, or larger properties, schedule professional winterization service early. A licensed irrigation pro will:
Inspect all zones for leaks
Drain and cap lines
Insulate main valves and PVB assemblies
Verify compliance with local backflow testing regulations
It’s a smart move to combine winterization with annual backflow testing — saving time and money.
🌤️ When to Schedule Backflow Winterization
In South and Central Texas, the best time is late October through mid-November — before the first major cold front. If you wait until after a freeze warning, you’re often too late to prevent damage.
💬 Final Thoughts
A little prevention now saves a major headache later. Protecting your irrigation system with proper backflow winterization ensures your sprinklers are ready to go next spring — without costly repairs.
👉 Need help winterizing your sprinkler system or backflow assembly? Contact Sprinkler Repair Professionals today to schedule service before the next freeze hits.